Boss MT-2 Metal Zone Guitar Pedal

Step into the Metal Zone

The MT-2 is BOSS’s second most popular drive pedal ever, after the DS-1 Distortion. A key to its enduring success is the ability to achieve dense, heavy crunch and singing sustain at any volume, providing an instantly inspiring experience for players at every skill level. And thanks to its smooth character and active EQ with semi-parametric midrange, the MT-2 works well with all types of guitar amplifiers, including clean “pedal platform” amps.

Innovative Dual-Stage Gain Circuit

Under the hood, the MT-2 employs an innovative analog circuit design to realize its rich, heavy voice. Two gain stages are configured in series, with the first stage providing mid-focused clarity that feeds the second stage’s more aggressive character. Carefully tuned pre- and post-distortion filtering (seven total stages) ensures that the tone is tight and well-defined at every setting, with no mud or flub whatsoever.

Shapeshifter

The MT-2’s advanced tone shaping goes far beyond the capabilities of most analog drive pedals, letting you dial in everything from chugging, mid-scooped rhythm mayhem to bold, cutting sounds that poke through the densest mixes. Post-distortion Low, Middle, and High knobs offer +15 dB cut or boost to perfectly match your guitar and amp type or craft entirely new tones. The midrange is the heart of every guitar’s voice, and the MT-2 provides a variable control to set the frequency in this critical band anywhere from 200 Hz to 5 kHz.

Specifications

Nominal Input Level

-20 dBu

Input Impedance

1 M ohm

Nominal Output Level

-20 dBu

Output Impedance

1 k ohm

Recommended Load Impedance

10 k ohms or greater

Bypass

Buffered bypass

Controls

DIST knob
EQUALIZER MIDDLE/MID FREQ knob
EQUALIZER HIGH/LOW knob
LEVEL knob
Pedal switch

Indicator

CHECK indicator (Used for indication of check battery)

Connectors

INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN jack

Power Supply

Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw

30 mA

Expected battery life under continuous use

Carbon: Approx. 12.5 hours
Alkaline: Approx. 23.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories

Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)

Option (sold separately)

AC adaptor: PSA series

Size and Weight

Width

73 mm
2-7/8 inches

Depth

129 mm
5-1/8 inches

Height

59 mm
2-3/8 inches

Weight (including battery)

385 g
14 oz